4 thoughts on “What should I pay attention to when buying a diamond ring? My hand does not belong to that kind of slender type, I don't know what it is suitable”
Leave a Comment
You must be logged in to post a comment.
You must be logged in to post a comment.
The 4C grading of diamond refers to:
Coour
Capital
Cut cut
The source of weight cact
4c is the first of the first four English words. The letters are "C", so people's grades of diamonds are referred to as 4C grading or 4C evaluation. At present, it is a global general standard for diamond grading.
This customers may ask which "C" is more important when evaluating diamonds?
In fact, at the 4C assessment, each element is very important, which plays a key role in the final price of the diamond finished product. In the case of near other elements, the most important thing is the total amount of diamonds. The larger the diamonds, the thinner and the scarce. Therefore, determining the price of a diamond, which weighs more important position, is also the reason why customers are usually commonly seen to measure prices.
The we know about the above, we start to learn from
1, and weigh the weight of the weight:
1 carats are equal to 0.2 grams. Carat in Greece originated from "Kerate", refers to long -horn bean trees, a plant that has widely popularized from East Asia to the Middle East. Because its fruits are called nearly consistent weight, long -horn bean trees are used as heavy units for jewelry and precious metals. Once you determine the cutting, color, and clarity of diamonds, you can easily find diamonds with your budget.
The weight of diamonds is very important in diamond grading. The weight of the diamond is measured with carats. The word carat comes from a seed called "small horn tree". Because the weight of this seed has an amazing consistency, each seed is a carat, so it is used to weigh the weight of diamonds in ancient times. The current national standard is 1CT = 0.2G, one carat is equal to one hundred points, for example: a 25 -point diamond can be recorded as 0.25 carats. Diamonds of the same quality, the larger the weight, the more precious.
The weight or size of the diamond is measured by carat (CT). 1CT = 0.2 g, and 1CT = 100 (PT) (or equivalent to 200 mg (mg)). The electronic balance with a accuracy of 0.0001CT is called accurate diamond weight. Mechanical balance can be refined to 0.001ct. The international gem quality unit, the finished diamond requires accurate to two digits after the decimal point, the third place after the cam value point is the third place every nine. Entry, other negligibles.
Summary: Start with 25 points or more, you can buy more than 30 points for money, and more rich can be more than 50 points.
2, cutting Cut
The various optical effects of the diamond are determined by the shape of the diamond and the angle between each surface. From the 4C grading below, we can also see that any one -cut evaluation factors are not standard, which will affect the bright and gorgeous diamonds to varying degrees.
If the countertop is too small, it will greatly weaken the brightness of the diamond;
If cut work, the various optical effects of diamonds cannot be fully achieved, and the brightness of diamonds and various optical effects such as fire color will decline.
H
Haha, I ’m also choosing a diamond ring recently. I have a little bit of knowing it. I hope it can be a bit helpful to the landlord. This is occasionally seen in an online diamond mall named E -carat diamond. I bought it there. The quality is still Yes
The ring should pay attention to
The ring worn on the index finger, requiring a three -dimensional shape. The style can be exaggerated.
The ring on the middle finger requires the atmosphere and a sense of weight, which can give people a more formal and positive feeling.
The ring on the ring finger is suitable for orthodox shapes, because its position is the most suitable and the visual balance is the best, so it can display the beauty of orthodox shape.
The ring worn on the little finger is suitable for cute and beautiful shapes, because the little finger gives a feminine feeling.
This fingers are slender, suitable for wide ring and volume rings, but the overall requirements are not bulky and cumbersome. Weak.
The obese hand is suitable for wearing a spiral ring, and the amount of gold is large, so that the fingers can be slightly slender.
The short -thick hand can choose a rings of streamlined shape.
It also pay attention to the auxiliary ring when wearing the ring combination, and when you wear the ring on the index finger, you generally do not need to be accompanied by a side ring. In addition, the color of the ring and clothing, nail polish and clothing are lined with, and unity is also the main point of paying attention to when wearing.
I just finished buying it, if you plan to buy a more expensive one. Go to buy a naked drill shop to buy it. It will introduce you very detailed. I have to go to one. It takes more than 6000 to buy it. R . n, if you buy about 3000. You can take a look at a place or brand with a brand.
must turn around more because of less. n If you buy about 3000, it is almost the same, just look good. Because the purity is not very high.
It is best to quit the face shape a little bigger!