wholesale fashion jewelry new york ny What happened to the Haier washing machine repeatedly END and UNB

wholesale fashion jewelry new york ny

5 thoughts on “wholesale fashion jewelry new york ny What happened to the Haier washing machine repeatedly END and UNB”

  1. wholesale jewelry stamping supplies UNB This is the unevenness of the clothing that causes the washing machine to not be dried. Take it out and shake the clothes before putting it in. The END means that the time is not over. You need to restart the time cleaning and set the settings.
    The automatic washing machine needs to be flat when dehydrating. When the dehydration is started, under the action of centrifugal force, the clothing should still move to the inner circle of the washing machine to remove the bucket. The clothing is unbalanced when dehydrated. The clothing is seriously unbalanced. When the tuber is started, it will directly encounter the safety switch to cause the washing machine to stop working.
    The expansion information
    maintenance common sense

    The should read the product manual carefully before using the washing machine. When used, the washing machine should be placed on a flat and solid ground, and it must be kept more than 5 cm from the wall and other items.
    The washing material should be washed and washed in batches according to the material, color, and dirty degree.
    Is before washing, remove the debris in the bag to prevent hard objects such as iron nails, coins, card issuing cards enter the laundry barrel; clothing with sediment should be removed and then put in the laundry barrel; Wash in the gauze bag.
    Reference materials: Baidu Encyclopedia-washing machine maintenance and maintenance
    Reference materials: Baidu Encyclopedia-washing machine failure maintenance

  2. wholesale jewelry johnston ri UNB This is the unevenness of the clothing that causes the washing machine to not be dried. Take it out and shake the clothes before putting it in. The END means that the time is not over. You need to restart the time cleaning and set the settings.
    The automatic washing machine needs to be flat when dehydrating. When the dehydration is started, under the action of centrifugal force, the clothing should still move to the inner circle of the washing machine to remove the bucket. The clothing is unbalanced when dehydrated. The clothing is seriously unbalanced. When the tuber is started, it will directly encounter the safety switch to cause the washing machine to stop working.
    Pucting information:
    The ones of the use of washing machines
    1. Install the washing machine in a flat place, stay away from the heat source, avoid direct sunlight, and avoid placing the washing machine on the bottom plate with a carpet.
    2. After the installation is completed, check whether the bottom surface is stable.
    3. The often used washing machine is actually easy to hide dirt. There is a bucket on the outside of the washing machine. When the washing machine works, the washing water will flow back and forth in the middle of the two barrels. The environment will breed a variety of bacteria and mold, and the smell will produce in the washing machine.
    4. Clean the drainage pump regularly. The drainage pump is the easiest place to deposit debris. Especially after washing the fabric, the wool will block the drainage pipe and affect the drainage.
    Reference materials: Haier after-sales maintenance center-Haier washing machine common failure and solution Daquan

  3. custom jewelry pieces wholesale Pay content for time limit to check for freenAnswer Hello, I'm glad to serve younThis is the meaning of the unevenness of the clothes that cause the washing machine to not dry. UNB means that the clothes in the drum cannot be dried. You need to take it out again and then put it in one by one. Try it again; the meaning of END needs to be re -set for cleaning. When the fully automatic washing machine is dehydrated, the clothing is flattened. When the dehydration is started, under the action of centrifugal force, the clothing still moves the inner circle of the washing machine to remove the bucket. The clothing is flat, and the clothing bias is unbalanced when dehydration. The clothing is seriously unbalanced. When the tuber is started, it will directly encounter the safety switch to cause the washing machine to stop working.

  4. zack wholesale jewelry Please refer to the following instructions:n
    UNB This is the unevenness of the clothes that cause the washing machine to not dry it. Take it out of the clothes and shake it and put it in. Can.nThis answer is suitable for any Haier washing machine

  5. lolo jewelry wholesale UNB is a washing machine caused by uneven clothes to be dried up. Take out the clothes and shake it before putting it in.
    end is unreparable, you need to restart time cleaning, and settled.
    The automatic washing machine needs to be flat when dehydrating. When the dehydration is started, under the action of centrifugal force, the clothing should still move to the inner circle of the washing machine to remove the bucket. The clothing is unbalanced when dehydrated. The clothing is seriously unbalanced. When the tuber is started, it will directly encounter the safety switch to cause the washing machine to stop working.
    Pucting information:
    Irds used in the use of washing machines
    1. Before washing clothes, be careful to check the labels on the clothes to see if it can be washed, ironed, etc. Choose the corresponding washing procedures for cotton weaving, chemical fiber, wool, etc.;
    2, classify the color, and try to separate the newly bought colored clothing as much as possible to see if it fades;
    3, washing dryer machine The capacity of dry clothes is half of the washing capacity, so be careful not to place too much clothing when drying to avoid wrinkles after drying;
    4, when you choose to wash or rinse, not to the selected water level. Purple wheels will not run;
    5. When dehydrating procedures, the cover must be turned on, and the cover should not be opened often; Note that the water is not splashed with a wet control board to prevent the internal electrical parts from burning due to water.

Leave a Comment