wholesale western jewelry without tax id Haier drum washing machines shot "END" and "UNB" at the same time and made titers. What faults were not dry?

wholesale western jewelry without tax id

3 thoughts on “wholesale western jewelry without tax id Haier drum washing machines shot "END" and "UNB" at the same time and made titers. What faults were not dry?”

  1. import jewelry wholesale UNB This is the unevenness of the clothing that causes the washing machine to not be dried. Take it out and shake the clothes before putting it in. The END means that the time is not over. You need to restart the time cleaning and set the settings.
    The automatic washing machine needs to be flat when dehydrating. When the dehydration is started, under the action of centrifugal force, the clothing should still move to the inner circle of the washing machine to remove the bucket. The clothing is unbalanced when dehydrated. The clothing is seriously unbalanced. When the tuber is started, it will directly encounter the safety switch to cause the washing machine to stop working.
    The expansion information
    Maintenance common sense
    Plash before using this washing machine, you should read the product manual carefully. The washing machine should be placed on a flat and solid ground when used, and items such as walls must be kept more than 5 cm.
    The washing material should be classified according to the material, color, dirty degree and batch washing.
    This should be cleaned up in the bag before laundry to prevent hard objects such as nails, coins, cards, and other hard objects entering the laundry barrel. After the mud with mud should be cleared, the mud enters the laundry barrel;
    Reference materials: Baidu Encyclopedia-washing machine maintenance and maintenance
    Reference materials: Baidu Encyclopedia-washing machine failure maintenance

  2. alexis bittar jewelry wholesale The problem of drainage pump. Such a phenomenon shows that the washing machine's work has ended, or the clothes have not been dried, so the fault code flickered alternately. The two English letters that are flickering are ends and the other is the end of the work. Therefore, the washing machine itself is also tangled. It is recommended to look at the drainage pump or find a professional master to check it.

  3. bella wholesale jewelry los angeles Pay content for time limit to check for freenAnswer UNB. This is the unevenness of the clothes placed that causes the washing machine to not be dried. Take it out of the clothes and shake it and put it in. The END means that the time is not over. You need to restart the time cleaning and set the settings.nWhen the fully automatic washing machine is dehydrated, the clothing needs to be flattened. When the dehydration is started, under the action of centrifugal force, the clothing still moves the inner circle of the washing machine to remove the bucket. The clothing is unbalanced when dehydrated. The clothing is seriously unbalanced. When the tuber is started, it will directly encounter the safety switch to cause the washing machine to stop working.nThe failure shows UNB, which is an abnormal water level sensor. "UNB" is an eccentric maintenance function, which shows that the clothes are too small to choose the washing machine and automatically choose not to dry. Or getting the distribution unbalanced when dried. Method of fault treatment: 1. Unplug the power supply and stop for more than 24 hours to make the CPU error to lose memory. Plug in the power supply, press the boot key, and press the function key to select it after drilling. If the electromagnetic starts, if it can be sucked and start the drainage, it will be successful. The six -second alarm sound is automatically shut down. 2. At this time, the failure may basically be eliminated. Re -executing a complete laundry task, there is no problem at the end of the entire laundry program, and confirmed that the failure has been eliminated at this time. Once this failure phenomenon is misunderstood during use, it will occur. Press the above method again.nThat's the broken water level sensornYou can disconnect for a daynYou can look at the operation method I posted abovenIt should help younI hope my answer can help you, okay, thank you. Ritualn6 morenBleak

Leave a Comment