Everyone knows that diamonds have the standard cutting surface of 57 to 58. Many brands have launched 88 sides, 100 -sided diamonds, and prices have soared all the way. I wonder if the more diamond cuts are, the better?
5 thoughts on “Is the more cutting surface better?”
Leave a Comment
You must be logged in to post a comment.
No, although the cut surface is indeed conducive to the reflection of light, it is not the more the diamond cut surface. Cut the good or bad, rely on good polishing and cut in accurate geometry.
The light emphasizes the scientific nature of cutting surface without considering the cutting method, and it is also impossible to obtain bright diamonds. In addition, there is also a need to emphasize that the number of diamond cuts depends on the size of the diamond. A diamond that can bear 105 aspects is usually above carat diamonds.
The expansion data
The standard round multi -faceted diamond cutting should be 57 or 58 face -to -face, and the difference is that the bottom tip is cut into surface on the basis of 57 face -to -face. Recently, merchants have launched 88 cutting noodles/105 cutting surface/108 cutting surface and 8 hearts and 8 arrows.
but increasing diamond brightness and fire color are determined by the proportion of diamond cutting, not as much as the diamond cut. Diamonds with many cut surfaces not only take up more working hours, but also have a large loss during the cutting process, which is much higher than the year -on -year cost.
"Related information for your reference, I hope to solve the" "related problems for you. OL Jewelry Network is China's first focus on Office female jewelry, diamond, diamond ring, wedding ring, wedding diamond ring, diamond ring. There are also Italian designers customized personalized jewelry for you, value for money, luxurious no longer expensive. Is diamond cutting more good? Obviously, diamonds are more and more good, the more light the noodles are, the more the fire is, the more the fire color, the more the fire color, the more the fire color will be, the more the fire color will be. Okay. The firecolor of diamonds that we often say is that the diamond looks very flickering. This is because the light is repeatedly reflected by the top of the diamond in the diamond. It can be reflected by the light. Make control.
Thenate the 57 -cutting surface of the circular diamond
The cutting of 57, this cutting package manages the light from any angle at the top of the diamond, no matter how many reflexes inside the diamond, no matter The city reflects from the top of the diamond.
The more the cut surface may be, the larger the craftsmanship, but it does not mean that the better it is. But the more diamonds are cut, the more brilliant such diamonds.
This question is simple, hard to fight, I will fight slowly when I have patience, you look slowly.
It's cut of diamonds. First of all, what you need to understand is the "refractive index" of the diamond. What is the refractive index? For a simple example, the physical textbook in the middle school said that when the chopsticks were extended into the water, the eyes saw that it became curved. This is caused by the refractive index of the water. It is a basic characteristic of all objects in the world, just like human genes, it is unchanged. The refractive index of the vacuum is equal to 1. Based on him, the other substances are several times. The rate is 2.417, which is very big. Then, we must also understand a term called "full reflection angle". It means that when the incident light is tilted to a certain angle, it is reflected all reflected due to the impact of the refractive index. This angle is called "full reflection angle". Maybe you may not understand it. Let ’s take another example. We can take the water as a mirror by the water, which is the truth. The circular diamonds we often see are tailor -made based on the refractive index of the diamond. The ratio of each of its face -to -face ratio is scientifically calculated, so it is 57 aspects (large ones large ones (large ones large ones. The tip that protects it in the future will not be broken by accident, so the bottom tip is smoothed, and a small noodle has become 58 noodles.) It guarantees that every face of the bottom is like a small mirror on the bottom. , Reflect all the light entering the diamond, so the diamond looks brighter than all other colorless gems, and it also has beautiful fire. But now many cutting work is just pursuing pattern renovation, and it is unscientific according to the basic characteristics of the diamond, so it is not scientific, so it is not that the more the diamonds he cut, the better. The light leakage of the diamond caused the diamond to lose its due glory.
In I do n’t know if I will understand, but I have tried my best. I believe my mentor will be happy to see my answer, because I have already told me what he tells me. Out. I hope it will help you, and I will not let me hit the words for such a long time.
uncertain. Essence Essence
This cutting of diamonds or not beautiful is not exactly determined by cutting surface
no.
This firecolor we often say is that the diamond looks very shining. This is because light is reflected by the top of the diamond in the diamond. Want to make light refraction. It is controlled by the cutting surface of the diamond.
The cutting of the 57 -cutting of the standard round diamonds. This cut guarantees that after the light is illuminated at any angle of the diamond, no matter how many times the inside of the diamond is reflected, it will reflect from the top of the diamond. Essence
The more craftsmanship may be, the more complicated, but it does not mean that the better. This is just a gimmick for merchants as the merchant.